PRODUCTS CENTER
Somalia Side Packaging Heat Shrink Packaging Machine (Rear Knife)
+86-15601559666
Product Description
Products Introduction
Full-automatic unmanned operation of the side sealing and shrinking machine, widely used in mass production packaging flow operation, automatic feeding, conveying, sealing, shrinking a one-time completion of the work efficiency, suitable for less than the height and width of the product;
The sealing part of the horizontal knife adopts vertical drive, longitudinal knife adopts international advanced constant temperature side sealing knife, the horizontal knife is placed behind the longitudinal knife structure, to ensure that the sealing line is straight and firm, can ensure that the sealing line is in the middle of the product, to achieve the perfect sealing effect.
Packaging size of different products, only need to use the handwheel to adjust can be completed, increase the reliability of some, more easy to operate.
Suitable for higher products.
This machine adopts advanced PLC programmable controller, with safety protection and alarm device, and the sealing and cutting system can continuously and smoothly make sealing action, no need to replace, maintenance operation is very simple.
Feeding length control through the combination of electric eye detection and timer, precise control of the film length, so that the shrinkage effect is easier to control.
Equipped with two sets of horizontal photoelectricity and one set of vertical photoelectricity, the sealing and packaging operation can be easily completed for wide and high packages.
Automatic waste winding, controlled by a separate motor, will not be too loose or too tight to pull apart, and the waste is easy to dismantle.
Power feeder at the front and powerless storage table at the rear are available on request.
Technical Parameters
| Model number | GH-5030LH | SF-8050 |
| Power | 3 kw | 22 kw |
| Power supply | AC 380V 3PH 50/60Hz | AC 380V 3PH 50/60Hz |
| Maximum package size L×W×H | L(unlimited) | 1800x350x300mm |
| W+H≤800mm, H≤300mm | ||
| Furnace chamber size L×W×H | / | 1800×800×500mm |
| Cross cut length | 900mm | / |
| Countertop Height | 950 ±25mm | 950 mm |
| Tempo | 15m/min. | 0-15m/min. |
| Air Supply | 6-8kg/cm2 | / |
| Applicable Shrink Film | POF | POF |
| Machine size L×W×H | 3233×1800×1700mm | 2800×1200×1895mm |
| Machine package size L×W×H | 2700×1850×1850mm | 2900×1250×1945mm |
| Weight/net weight | 1350/1300kgs | 850/800kgs |
Factory Scene
Can't find the product you need?
Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry
Contact Us